Corvette 2005-2008

Removal & Installation

Print

  1. Remove the right hand insulator panel.
    NOTE
    The blower motor resistor is internal to the blower motor assembly and is not serviced separately.

  2.  
  3. Disconnect the blower motor electrical connector.
  4.  
  5. Remove the blower motor retaining screws.
  6.  
  7. Remove the blower motor from the HVAC module.
  8.  

To install:

  1. Install the blower motor to the HVAC module.
  2.  
  3. Install the blower motor retaining screws.
  4.  
  5. Connect the blower motor electrical connector.
  6.  
  7. Install the RH insulator panel.
  8.  

 
label.common.footer.alt.autozoneLogo