Corvette 2005-2008

Multi-Function (Combination) Switch

Print

Removal & Installataion



  1. Remove the steering wheel assembly.
  2.  
  3. Remove the upper and lower steering column trim covers.
  4.  
  5. Remove the wire harness straps from the steering column tilt head assembly and the column.
  6.  
  7. Remove the wire harness assembly from the wire harness strap.
  8.  
  9. Remove the 2 pan head tapping screws from the switch.
  10.  
  11. Remove the multifunction turn signal switch assembly.
  12.  

To install:


NOTE
Important: The electrical contact must rest on the turn signal cancel cam assembly.

  1. Install the multifunction turn signal switch assembly to the steering column assembly.
  2.  
  3. Install the 2 pan head tapping screws and tighten to 62 inch lbs. (7 Nm).
  4.  
  5. Route the wire harness assembly along the steering column jacket assembly.
  6.  
  7. Install the wire harness assembly into the wire harness strap.
  8.  
  9. Install new wire harness straps to the steering column assembly and the column.
  10.  
  11. Install the upper and lower steering column trim covers.
  12.  
  13. Install the steering wheel assembly.
  14.  

 
label.common.footer.alt.autozoneLogo