Corvette 2005-2008

Filling & Bleeding

Print

  1. Fill pump reservoir with fluid to minimum system level, FULL COLD level, or middle of hash mark on cap stick fluid level indicator.
  2.  
  3. Raise the vehicle until the front wheels are off the ground.
  4.  
  5. With the key on, engine OFF, turn the steering wheel from stop to stop 12 times.
  6.  
  7. Verify power steering fluid level.
  8.  
  9. Start the engine. Rotate steering wheel from left to right. Check for sign of cavitation or fluid aeration (pump noise/whining).
  10.  
  11. Verify the fluid level. Repeat the bleed procedure, if necessary.
  12.  

 
label.common.footer.alt.autozoneLogo