Crossfire, 2004-2005

Wheel Speed Sensors

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove or disconnect the following:

    Bolt attaching the wheel speed sensor to the rear knuckle
     
    Rear wheel speed sensor from the knuckle
     
    Rubber grommet
     
    Wheel speed sensor wire harness from the mount
     
    Wheel speed sensor harness connector

    Click image to see an enlarged view

    Fig. Wheel speed sensors are located in each wheel knuckle

     

  4.  

To install:

  1. Install or connect the following:

    Wheel speed sensor wire harness connector
     
    Rubber grommet
     
    Wheel speed sensor wire harness to the mount
     
    Wheel speed sensor to the knuckle and tighten the bolt to 106 inch lbs. (12 Nm)
     

  2.  

 
label.common.footer.alt.autozoneLogo