Crossfire, 2004-2005

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Disconnect battery negative cable from battery and properly isolate to prevent accidental reconnection.
  4.  
  5. Remove or disconnect the following:

    Lower instrument panel cover from the instrument panel
     
    Blower motor electrical connector from the relief in the blower motor door
     
    Blower motor door catch mounts
     

  6.  
  7. Swing the blower motor door down.

    Screws attaching the blower motor to the heater housing
     
    Blower motor and squirrel cage as an assembly

    Click image to see an enlarged view

    Fig. Lower instrument panel cover (1)



    Click image to see an enlarged view

    Fig. Blower motor in situ and location of the retaining screws (1)

     

  8.  

To install:

  1. Install or connect the following:

    Blower motor and squirrel cage as an assembly
     
    Screws attaching the blower motor to the heater housing
     

  2.  
  3. Swing the blower motor door up.

    Blower motor door catch mounts by sliding them over to the detents
     
    Blower motor electrical connector
     
    Lower instrument panel cover
     

  4.  

 
label.common.footer.alt.autozoneLogo