Crossfire, 2004-2005

Engine

Imprimir

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Drain the cooling system.
  4.  
  5. Recover the A/C refrigerant, if equipped.
  6.  
  7. Drain the engine oil.
  8.  
  9. Relieve the fuel system pressure.
  10.  
  11. Remove or disconnect the following:

    Negative battery cable
     
    Air cleaner housing assembly
     
    Radiator hoses
     
    Radiator and fan shroud
     
    Accessory drive belt
     
    Vacuum hoses from brake booster, intake manifold and purge valve
     
    Power steering fluid from pump
     
    Ground lead at power steering pump
     
    Power steering pressure and return lines at pump
     
    Oxygen (O 2 ) sensors
     
    Mass Air Flow (MAF) sensor
     
    Heater hose
     
    Fuel supply line
     
    Engine wiring harness
     
    Lower radiator hose and coolant bypass hose from water pump
     
    Upper radiator hose from thermostat housing
     

  12.  
  13. Raise and support vehicle on jack stands.
  14.  
  15. Remove or disconnect the following:

    Engine undercover
     
    Front exhaust pipes
     
    Ground cable at transmission
     
    Driveshaft
     
    Starter
     

  16.  
  17. Place a transmission jack under the transmission.