Removal & Installation
- Before servicing the vehicle, refer to the Precautions section.
- Raise and support the vehicle.
Remove or disconnect the following:
WARNINGNever allow the disc brake caliper to hang from the brake hose. Damage to the brake hose can result.
Wheel and tire assembly
- Provide a suitable support to hang the caliper securely.
Remove the retaining bolt and then remove the brake rotor (1) from the wheel hub.
Install or connect the following:
CAUTIONDo not move vehicle until a firm brake pedal is obtained.
Rotor (1) onto the wheel hub
- Pump the brake pedal until the caliper pistons and the brake pads are seated and a firm brake pedal is achieved.