Crossfire, 2004-2005

Coil Springs

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
    NOTE
    The vehicle must be sitting on its wheels when removing the upper shock mount nut.

  2.  
  3. Remove or disconnect the following:

    Front wheel
     
    Shock absorber
     

  4.  
  5. Support the lower control arm on a floor jack.
  6.  
  7. Compress the spring using special tools 9151 and 9152 or equivalent.
  8.  
  9. Remove the lower control arm mounting nuts and bolts.
  10.  
  11. Lower the jack while holding the spring. When enough clearance is obtained, remove the spring.
  12.  

To install:

  1. Install the coil spring and raise the control arm into position.
  2.  
  3. Install or connect the following:

    Lower control arm bolts and nuts
     
    Shock absorber
     
    Tighten lower control arm nuts to 88 ft. lbs. (120 Nm)
     

  4.  

 
label.common.footer.alt.autozoneLogo