Crossfire, 2004-2005

Lower Control Arms

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove or disconnect the following:

    Front wheel
     
    Coil spring
     
    Lower shock bolt
     
    Stabilizer bar clamp
     
    Lower ball joint nuts
     
    Press ball joint out of steering knuckle using special tool 9168 or equivalent puller
     
    Lower control arm bolts
     
    Lower control arm
     

  4.  

To install:

  1. Install or connect the following:

    Lower control arm. Tighten the bolts to the frame to 88 ft. lbs. (120 Nm).
     
    Lower control arm to steering knuckle lower ball joint. Tighten the nut to 33 ft. lbs. (45 Nm).
     
    Stabilizer bar clamp. Tighten the nuts to 15 ft. lbs. (20 Nm).
     
    Lower shock bolt. Tighten the nut to 41 ft. lbs. (55 Nm).
     
    Coil spring
     
    Front wheel
     

  2.  

 
label.common.footer.alt.autozoneLogo