Crossfire, 2004-2005

Shock Absorbers

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
    NOTE
    The vehicle must be sitting on its wheels when removing the upper shock mount nut.

  2.  
  3. Remove the upper mounting nut, washer and rubber nut.
  4.  
  5. Raise and support the vehicle.
  6.  
  7. Remove the lower mounting bolt and remove the shock.
  8.  

To install:

  1. Install or connect the following:

    Shock absorber. Tighten the lower bolt to 41 ft. lbs. (55 Nm) and the upper mounting nut to 13 ft. lbs. (18 Nm).
     

  2.  

 
label.common.footer.alt.autozoneLogo