Removal & Installation
- Before servicing the vehicle, refer to the Precautions section.
- Raise and support the vehicle.
Remove or disconnect the following:
WARNINGNever allow the disc brake caliper to hang from the brake hose. Damage to the hose can result.
Wheel and tire assembly.
- Provide a suitable support to hang the caliper securely.
Remove the rotor retaining bolt and remove the rotor from the wheel hub.
Install or connect the following:
Rotor onto the wheel hub
- Lower the vehicle.
- Pump the brake pedal until the caliper pistons and the brake pads are seated, and a firm brake pedal is achieved.