The voltage regulator (2) is a separate component attached to the rear of the alternator assembly (1). If replacement is necessary, the voltage regulator can be replaced separately from the alternator. The amount of DC current produced by the generator is controlled by the voltage regulator circuitry. This circuitry is connected in series with the generators second rotor field terminal and its ground.
Removal & Installation
- Before servicing the vehicle, refer to the Precautions Section.
- Disconnect battery negative cable from battery and properly isolate to prevent accidental reconnection.
Remove or disconnect the following:
Install or connect the following:
Voltage regulator. Ensure the ground lug is making contact to the voltage regulator