Crossfire 2006-2008

Electronic Control Module

Print

Operation



The ECM controls the vehicle engine operating system.

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Slide the clips forward to remove the plastic control module box cover.
  6.  
  7. Holding the retaining clip back, pull the PCM module up and out of the control module box.
  8.  
  9. Disconnect the electrical connectors.
  10.  
  11. Remove the PCM from the vehicle.
  12.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  

 
label.common.footer.alt.autozoneLogo