Crossfire 2006-2008

Removal & Installation

Print


CAUTION
Disable the airbag system before attempting any steering wheel, steering column or instrument panel diagnosis or service.

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect battery negative cable from battery and properly isolate to prevent accidental reconnection.
  4.  
  5. Remove or disconnect the following:

    Radio
     
    Center console panel screws
     
    A/C heater control module by pressing in the catch lugs at the sides
     
    Electrical connector by swinging the retaining bow down
     
    A/C heater control module

    Click image to see an enlarged view

    Fig. HVAC panel electrical connector (1)



    Click image to see an enlarged view

    Fig. A/C heater control module (2) catch lugs (1)



    Click image to see an enlarged view

    Fig. Center console panel (2) screws (1)

     

  6.  

To install:

  1. Install or connect the following:

    Electrical connector by swinging the retaining bow up
     
    A/C heater control module by pressing in the catch lugs at the sides
     
    Center console panel screws
     
    Radio
     

  2.  
  3. Connect the negative battery cable.
  4.  

 
label.common.footer.alt.autozoneLogo