Crossfire 2006-2008

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect battery negative cable from battery and properly isolate to prevent accidental reconnection.
  4.  
  5. Remove or disconnect the following:

    Radiator fan harness connector
     
    Coolant return hose from the mounting bracket
     
    Radiator fan hold down clamps with suitable tool
     

  6.  
  7. Carefully pry the upper radiator hose and return hoses away from the cooling fan.
  8.  
  9. Gently lift the radiator fan up and out of the vehicle.

    Click image to see an enlarged view

    Fig. Removal of radiator fan

  10.  

To install:


NOTE
Lightly lubricate the two locating studs on the bottom of the radiator fan prior to installation.

  1. Gently lower the radiator fan into the vehicle.
  2.  
  3. Carefully pry the upper radiator hose and return hoses away from the cooling fan.
  4.  
  5. Install the radiator fan locating studs into the lower rubber mounts.
  6.  
  7. Install the radiator fan hold down clamps.
  8.  
  9. Route the coolant return hose through the bracket on the radiator fan.
  10.  
  11. Connect the radiator fan harness connector.
  12.  
  13. Connect the negative battery cable.
  14.  

 
label.common.footer.alt.autozoneLogo