Crossfire 2006-2008

Brake Disc (Rotor)

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Raise and support the vehicle.
  4.  
  5. Remove or disconnect the following:
    WARNING
    Never allow the disc brake caliper to hang from the brake hose. Damage to the brake hose can result.



    Wheel and tire assembly
     
    Brake pad wear indicator
     
    Caliper bracket mounting bolts and remove the caliper and bracket as an assembly from the steering knuckle
     

  6.  
  7. Provide a suitable support to hang the caliper securely.
  8.  
  9. Remove the retaining bolt and then remove the brake rotor (1) from the wheel hub.

    Click image to see an enlarged view

    Fig. Front rotor (1) and related components

  10.  

To install:

  1. Install or connect the following:
    CAUTION
    Do not move vehicle until a firm brake pedal is obtained.



    Rotor (1) onto the wheel hub
     
    Retaining bolt and tighten to 7 ft. lbs. (10 Nm)
     
    Caliper and bracket assembly on the knuckle
     
    Caliper bracket mounting bolts and tighten to 85 ft. lbs. (115 Nm)
     
    Brake pad wear indicator
     
    Tire and wheel assembly
     

  2.  
  3. Pump the brake pedal until the caliper pistons and the brake pads are seated and a firm brake pedal is achieved.
  4.  

 
label.common.footer.alt.autozoneLogo