Crossfire 2006-2008

Shock Absorbers

Print

Removal & Installation




NOTE
The vehicle must be resting on its wheels, before removing the top shock absorber mounting hardware.

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the shock absorber upper mounting hardware.
  4.  
  5. Raise and support the vehicle safely.
  6.  
  7. Remove or disconnect the following:

    Rear wheel
     
    Lower control arm cover
     
    Lower mounting bolts
     
    Shock absorber
     

  8.  

To install:

  1. Install or connect the following:

    Shock absorber. Tighten the upper bolt nut to 13 ft. lbs. (18 Nm) and the lower bolt to 41 ft. lbs. (55 Nm).
     
    Lower control arm cover
     
    Rear wheel
     

  2.  

 
label.common.footer.alt.autozoneLogo