Crown Victoria, Grand Marquis, Town Car, 2006-2007

Removal & Installation


  1. Before servicing the vehicle, refer to the Precautions section.
  3. Disconnect battery negative cable from battery and properly isolate to prevent accidental reconnection.
  5. Remove or disconnect the following:

    Degas bottle
    Power steering reservoir and set aside
    Fan motor electrical connector
    Fan blade, motor and shroud assembly


To install:

  1. Install or connect the following:

    Fan blade, motor and shroud assembly and tighten the bolts to 89 inch lbs. (10 Nm)
    Fan motor electrical connector
    Power steering reservoir and tighten the bolt to 9 ft. lbs. (12 Nm)
    Degas bottle and tighten the screws to 89 inch lbs. (10 Nm)

    Click image to see an enlarged view

    Fig. Degas bottle