Dakota 2006-2007

Removal & Installation

Print

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the center bezel from the instrument panel, disconnect the wire harness connector(s) from the A/C-heater control and place the center bezel on a workbench.
  4.  
  5. Remove the four screws that secure the A/C heater control to the instrument panel center bezel.
  6.  
  7. Remove the A/C heater control from the instrument panel center bezel.

    Click image to see an enlarged view

    Fig. Two screws retain the center bezel to the instrument panel

  8.  

to install:

  1. Position the A/C heater control into the instrument panel center bezel.
  2.  
  3. Install the screws that secure the A/C heater control to the instrument panel center bezel. Tighten the screws to 17 inch lbs. (2 Nm).
  4.  
  5. Connect the wire harness connector(s) to the A/C heater control and install the instrument panel center bezel.
  6.  
  7. Reconnect the negative battery cable.
  8.  

 
label.common.footer.alt.autozoneLogo