Dakota 2006-2007

Removal & Installation

Print

  1. Drain the cooling system.
  2.  
  3. Disconnect the sensor electrical connector.
  4.  
  5. Remove the ECT sensor.

    Click image to see an enlarged view

    Fig. ECT sensor location

  6.  

To install:

  1. Apply thread sealant to the sensor threads.
  2.  
  3. Install the ECT sensor into the engine block and tighten the mounting bolt to 8 ft. lbs. (11 Nm).
  4.  
  5. Connect the electrical connector.
  6.  
  7. Refill the cooling system to the correct level.
  8.  

 
label.common.footer.alt.autozoneLogo