DeVille, Eldorado, Seville 1999-2005

Fuel Tank Pressure Sensor Connector

Print

Removal & Installation



  1. Remove the rear compartment trim panel.
  2.  
  3. Remove the fuel sender access panel bolts.
  4.  
  5. Remove the fuel sender access panel.
  6.  
  7. Disconnect the fuel tank pressure sensor electrical connector.
  8.  
  9. Remove the fuel tank pressure sensor.

    Click image to see an enlarged view

    Fig. Removing access panel for fuel tank pressure sensor



    Click image to see an enlarged view

    Fig. Identifying Fuel Tank Pressure Sensor

  10.  

To install:

  1. Install the fuel tank pressure sensor.
  2.  
  3. Connect the fuel tank pressure sensor electrical connector.
  4.  
  5. Install the fuel sender access panel.
  6.  
  7. Install the fuel sender access panel bolts. Tighten the fuel sender access panel bolts to 2 Nm (18 inch lbs.).
  8.  
  9. Install the rear compartment trim panel.
  10.  

 
label.common.footer.alt.autozoneLogo