//bottom ads

DeVille, Eldorado, Seville 1999-2005

Removal & Installation

Print

  1. Remove the radio and HVAC control assembly.
  2.  
  3. Remove the nuts from the bracket that connects the radio and HVAC control assembly.
  4.  
  5. Remove the HVAC control assembly.
  6.  

To install:

  1. Install the HVAC control assembly to the radio brackets.
  2.  
  3. Install the nuts and tighten to 53 inch lbs. (6 Nm).
  4.  
  5. Install the radio and HVAC control assembly.
  6.  

  1. Remove the instrument panel center trim plate.
  2.  
  3. Remove the console trim plate.
  4.  
  5. Remove the control assembly bracket fasteners.
  6.  
  7. Disconnect the electrical connectors from the control assembly and radio.
  8.  
  9. Remove the control assembly and radio.
  10.  
  11. Remove the control assembly retaining nuts.
  12.  
  13. Remove the control assembly from the bracket.
  14.  

To install:

  1. Install the control assembly to the bracket.
  2.  
  3. Install the control assembly retaining nuts and tighten to 88 inch lbs. (10 Nm).
  4.  
  5. Connect the electrical connectors to the control assembly and radio.
  6.  
  7. Install the control assembly and radio to vehicle.
  8.  
  9. Install the control assembly bracket fasteners.
  10.  
  11. Install the console trim plate.
  12.  
  13. Install the instrument panel center trim panel.
  14.  
  15. Recalibrate the control assembly.
  16.  

  1. Remove the radio and HVAC control assembly.
  2.  
  3. Remove the nuts from the bracket that connects the radio and HVAC control assembly.
  4.  
  5. Remove the HVAC control assembly.
  6.  

To install:

  1. Install the HVAC control assembly to the radio brackets.
  2.  
  3. Install the nuts and tighten to 53 inch lbs. (6 Nm).
  4.  
  5. Install the radio and HVAC control assembly.
  6.  

  1. Remove the instrument panel center trim plate.
  2.  
  3. Depress and hold the locking tabs, located on the 4 corners of the HVAC control assembly. Pull the HVAC control away from the instrument panel.
  4.  
  5. Disconnect the electrical connectors from the HVAC control.
  6.  
  7. Remove the HVAC control assembly from the instrument panel.
  8.  

To install:

  1. Connect the HVAC electrical connectors.
  2.  
  3. Install the HVAC control assembly into the instrument panel. Push the HVAC control assembly into the instrument panel opening in order to engage the retainers.
  4.  
  5. Install the instrument panel center trim plate.
  6.  

 
label.common.footer.alt.autozoneLogo