Dodge Aspen/Volare 1976-1980 Repair Guide

Instrument Cluster

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Fig. 1 Exploded view of the instrument cluster bezel and trim panels



Click image to see an enlarged view

Fig. Fig. 2 Exploded view of the instrument panel and related components

  1. Disconnect battery ground cable. Make sure the gearshift lever is in Park.
  2.  
  3. Remove the four screws which are located in the lower edge of the instrument cluster bezel.
  4.  
  5. The bezel is retained by clips along the upper edge. Pull the bezel toward while disengaging the clips to remove the bezel.
  6.  
  7. Reach up behind the cluster and disconnect the speedometer cable by pressing the retaining clip downward.
  8.  
  9. Loosen the gearshift indicator pointer and rotate it with the setscrew to allow clearance for the cluster to be removed.
  10.  
  11. Remove the cluster mounting screws.
  12.  
  13. Pull out on the cluster and disconnect any wires still attached to the back of the cluster. Remove the cluster.
  14.  
  15. Installation is the reverse of the removal procedure.
  16.  

 
label.common.footer.alt.autozoneLogo