Dodge Aspen/Volare 1976-1980 Repair Guide

Seats

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Fig. 1 View of the front bench seat slider assembly



Click image to see an enlarged view

Fig. Fig. 2 Seat mounting on all models. Use RTV sealant around the mounting holes before installing the seat

Front Bench Seats
  1. Remove the seat track-to-floor pan bolts and lift out the seat.
  2.  

To install:

  1. Apply sealer to the hole areas and install the seat. Tighten the bolts to 30 ft. Lbs. (40 Nm).
  2.  

Bucket Seats
  1. Remove the seat track-to-floor pan bolts and lift out the seat.
  2.  

To install:

  1. Apply sealer to the hole areas and install the seat. Tighten the bolts to 30 ft. Lbs. (40 Nm).
  2.  

Rear Bench Seat
  1. Remove the seat-to-floor pan bolts and lift the seat out of the vehicle.
  2.  

To install:

  1. Apply sealer to the area of the bolt holes.
  2.  
  3. Position the new seat, then tighten the bolts to 30 ft. Lbs. (40 Nm).
  4.  

 
label.common.footer.alt.autozoneLogo