Dodge Aspen/Volare 1976-1980 Repair Guide

Signal and Marker Lights

Print

REMOVAL & INSTALLATION



Front Turn Signal and Park Lights


Click image to see an enlarged view

Fig. Fig. 1 To replace a front signal light, twist the bulb socket to disengage it from the lens ...



Click image to see an enlarged view

Fig. Fig. 2 ... then remove the bulb from the socket by pushing in, twisting and pulling outward



Click image to see an enlarged view

Fig. Fig. 3 Exterior Light Bulbs



Click image to see an enlarged view

Fig. Fig. 4 Interior Light Bulbs



Click image to see an enlarged view

Fig. Fig. 5 To replace a side marker light, twist the bulb socket while pulling outward to remove it ...



Click image to see an enlarged view

Fig. Fig. 6 ... then pull straight out on the bulb to remove it from the socket

  1. Remove the bulb socket from the lens assembly by turning the bulb socket, then pulling out. On Volare models, access to the bulb socket is from under the hood. On Aspen models, access to the bulb socket is by reaching up behind the front bumper.
  2.  
  3. Remove the bulb from the socket by gently pushing in while turning the bulb counterclockwise.
  4.  
  5. Installation is the reverse of the removal procedure.
  6.  

Side Marker Lights
  1. Remove the bulb socket from the lens assembly by turning the socket, then pulling out. For front side marker lights, access to the bulb socket is from under the hood. For rear side marker lights, access to the bulb socket is from inside the trunk or lift gate.
  2.  
  3. Remove the bulb from the socket by pulling it straight out.
  4.  
  5. Installation is the reverse of the removal procedure.
  6.  

Rear Turn Signal, Brake, and Parking Lights


Click image to see an enlarged view

Fig. Fig. 7 To replace a rear brake/signal light, pull the bulb socket out of the lens ...



Click image to see an enlarged view

Fig. Fig. 8 ... then remove the bulb from the socket by pushing in, twisting and pulling outward



Click image to see an enlarged view

Fig. Fig. 9 To replace a license plate light, twist the bulb socket while pulling outward to remove it ...



Click image to see an enlarged view

Fig. Fig. 10 ... then pull straight out on the bulb to remove it from the socket

  1. Remove the bulb socket from the lens assembly by turning the socket, then pulling out. Access to the bulb socket is from inside the trunk or lift gate.
  2.  
  3. Remove the bulb from the socket by gently pushing in while turning the bulb counterclockwise.
  4.  
  5. Installation is the reverse of the removal procedure.
  6.  

License Plate Light
  1. Remove the bulb socket from the lens assembly by turning the socket, then pulling out. Access to the bulb socket is under the bumper overhang at the license plate.
  2.  
  3. Remove the bulb from the socket by pulling it straight out.
  4.  
  5. Installation is the reverse of the removal procedure.
  6.  

Dome Light


Click image to see an enlarged view

Fig. Fig. 11 To replace the dome light, pull the lens cover off ...



Click image to see an enlarged view

Fig. Fig. 12 ... then remove the bulb from its retaining clips/contacts

  1. Remove the dome light lens from the light housing.
  2.  
  3. Remove the dome light bulb from the light housing.
  4.  
  5. Installation is the reverse of the removal procedure.
  6.  

 
label.common.footer.alt.autozoneLogo