Dodge Colt/Challenger/Conquest/Vista 1971-1989 Repair Guide

Clutch Master Cylinder

Print

REMOVAL & INSTALLATION



  1. Loosen the bleeder screw on the slave cylinder and drain the system.
  2.  
  3. Disconnect the pushrod from the clutch pedal.
  4.  
  5. Disconnect the clutch pedal from the pedal bracket.
  6.  
  7. Disconnect the fluid line from the master cylinder.
  8.  
  9. Unbolt and remove the master cylinder.
  10.  

On the 4-WD Vista, the lower master cylinder mounting nut is accessed from inside the car.

  1. Install the master cylinder and bleed the system.
  2.  

 
label.common.footer.alt.autozoneLogo