REMOVAL & INSTALLATION
Fig. Fig. 1 Remove all mounting screws securing the grille ...
Fig. Fig. 2 ... then separate the unit from the vehicle
Fig. Fig. 3 Grille and garnish moldings-FWD Colt
Fig. Fig. 4 Grille and garnish moldings-1989 Conquest
Remove the screws from the headlamp bezels. Remove the screws from the sides of the grille.
Remove the screws from the grille to center support bracket.
Remove the grille.
Place the grille into position. Install the center support screws and the outer mounting screws. Center the grille and tighten the mounting screws.
Install the headlamp bezel screws.