Dodge Colt/Challenger/Conquest/Vista 1971-1989 Repair Guide

Rear Window Wiper Switch

Print

REMOVAL & INSTALLATION



Vista and 1979-84 Colt
  1. Pry the switch bezel from the panel.
  2.  
  3. Reach behind the panel and disconnect the wiring from the switch.
  4.  
  5. Depress the two retainers and pull the switch from the panel.
  6.  
  7. Install the switch. Connect the wiring harness and install the bezel.
  8.  

1985-89 Colt

The switch is integral with the windshield wiper switch.

Conquest
  1. Remove the switch panel from the instrument panel.
  2.  
  3. Disconnect the wiring from the switch.
  4.  
  5. Separate the switch from the bezel.
  6.  
  7. Install the switch. Connect the wiring harness. Install the switch panel.
  8.  

 
label.common.footer.alt.autozoneLogo