REMOVAL & INSTALLATION
Fig. Fig. 1 Exploded view of the Vista front seat mounting
Fig. Fig. 2 Exploded view of the Vista second seat mounting
Fig. Fig. 3 Exploded view of the Vista third seat mounting
Fig. Fig. 4 Exploded view of the Conquest front and rear seat mounting
Depending on year and model, the front seat(s) are mounted by bolts accessible from underneath the vehicle, or a combination of nuts and bolts. The nuts usually are used to mount the front of the seat brackets, and are loosened from the passenger's compartment. The nuts are usually covered by a trim plug which must be removed first. The rear of the seat bracket mounting bolts are accessed from underneath the vehicle mounting are loosen.
The second seat (Vista models) is mounted by nuts and bolts that can be removed from the passengers compartment.
Rear seats are removed by pushing the front of the seat cushion back towards the rear of the vehicle and lifting it up to free it from the mounting clips. Or, removing the bolts from the front of the seat cushion brackets. The seat back is usually retained by bolts through the floor pan that are visible after the cushion has been removed.
Fig. Fig. 5 Troubleshooting of Wind Noise
Fig. Fig. 6 Trouble Shooting
Fig. Fig. 7 Trouble Shooting (Cont.)
Fig. Fig. 8 Trouble Shooting (Cont.)
Fig. Fig. 9 Trouble Shooting (Cont.)
Fig. Fig. 10 Trouble Shooting (Cont.)
Fig. Fig. 11 How to Remove Stains from Fabric Interior