Dodge Colt/Challenger/Conquest/Vista 1971-1989 Repair Guide

Dome Light

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Fig. 1 If you dome light bulb is blown, simply unsnap the lens from the housing ...



Click image to see an enlarged view

Fig. Fig. 2 ... and remove the bulb

  1. Unsnap the lens from the dome lamp body.
  2.  
  3. Remove the bulb.
  4.  
  5. Unscrew the housing assembly from the roof.
  6.  
  7. Separate the wiring harness from the body and lamp assembly.
  8.  

To install:

  1. Join the wiring harness connectors and place the lamp body into position.
  2.  
  3. Tighten the lamp body to the roof.
  4.  
  5. Insert a light bulb in place and snap the lens on the lamp body.
  6.  

 
label.common.footer.alt.autozoneLogo