Dodge Colt/Challenger/Conquest/Vista 1971-1989 Repair Guide

Turn Signal/Side Marker Lamps

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Fig. 1 The front side marker lamp lens is retained by two screws



Click image to see an enlarged view

Fig. Fig. 2 Once the lens is removed, you can access the bulb



Click image to see an enlarged view

Fig. Fig. 3 Remove the bulb and replace with a new one if needed



Click image to see an enlarged view

Fig. Fig. 4 The front turn signal lens is removed in a similar manner to the side marker

  1. Unscrew the side marker lens from the body of the vehicle.
  2.  
  3. Remove the lens and mounting screws.
  4.  
  5. Check the gasket for any deterioration.
  6.  
  7. Remove the bulb and replace if necessary.
  8.  

To install:

  1. Place the new bulb into position and check for operation.
  2.  
  3. Install the lens on the body of the vehicle and tighten the mounting screws.
  4.  

 
label.common.footer.alt.autozoneLogo