Dodge Omni/Horizon/Rampage 1978-1989 Repair Guide

Blower Motor

Print

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the three screws securing the glovebox to the instrument panel.
  4.  
  5. Disconnect the wiring from the blower and case.
  6.  
  7. Remove the blower vent tube from the case.
  8.  
  9. Loosen the recirculating door from the bracket and remove the actuator from the housing. Leave the vacuum lines attached.
  10.  
  11. Remove the seven screws attaching the recirculating housing to the air conditioning unit and remove the housing.
  12.  
  13. Remove the three mounting flange nuts and washers.
  14.  
  15. Remove the blower motor from the unit.
  16.  
  17. Installation is the reverse of removal. Replace any damaged sealer.
  18.  

 
label.common.footer.alt.autozoneLogo