Dodge Omni/Horizon/Rampage 1978-1989 Repair Guide




The fuse block is located on the left side of the vehicle, beneath the end of the instrument panel. The circuit each fuse protects is indicated by numbers located on the fuse block.

A blade type fuse is used instead of a glass cartridge type. The amperage rating is on the top of the colored fuse.

When you are replacing a blown fuse be sure to use only the specified fuse for that particular circuit. If one is not available only temporarily use one from another circuit that is not necessary to keep the vehicle running. For example a clock, radio or cigar lighter fuse is a good idea. Never use a fuse higher than specified, damage to the wiring circuit could occur.