Dodge Omni/Horizon/Rampage 1978-1989 Repair Guide

Regulator

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the wires from the regulator.
  4.  



Click image to see an enlarged view

Fig. Fig. 1 Unplug the wiring harness from the regulator

  1. Remove the two sheet metal screws securing the regulator to the right side fender skirt.
  2.  



Click image to see an enlarged view

Fig. Fig. 2 Remove the two screws securing the regulator to the body of the vehicle



Click image to see an enlarged view

Fig. Fig. 3 The regulator can now be removed from the vehicle

To install:

  1. Attach the regulator to the vehicle with the mounting screws.
  2.  
  3. Attach the wiring harness to the regulator.
  4.  
  5. Connect the negative battery cable.
  6.  

 
label.common.footer.alt.autozoneLogo