Dodge Omni/Horizon/Rampage 1978-1989 Repair Guide

Sway Bar

Print

REMOVAL & INSTALLATION



  1. Raise and support the car.
  2.  
  3. Take off the nut from the control arm end bushing and reinforcement plates.
  4.  
  5. Remove the nut retainers and insulator holding the sway bar to the crossmember linkage.
  6.  
  7. Take off the sway bar.
  8.  



Click image to see an enlarged view

Fig. Fig. 1 Exploded view of the sway bar link kit

  1. Inspect the sway bar for distortion or fatigue cracks in the metal. Replace any damaged or distorted bushings.
  2.  
  3. Installation is the reverse of removal.
  4.  

 
label.common.footer.alt.autozoneLogo