Dodge Omni/Horizon/Rampage 1978-1989 Repair Guide

Blower Motor

Print

REMOVAL & INSTALLATION



The blower motor is located under the instrument panel on the left side of the heater assembly.

  1. Disconnect the motor wiring.
  2.  
  3. Remove the left outlet duct.
  4.  



Click image to see an enlarged view

Fig. Fig. 1 Remove the left outlet duct

  1. Remove the motor retaining screws, then remove the motor.
  2.  



Click image to see an enlarged view

Fig. Fig. 2 Unscrew the heater motor



Click image to see an enlarged view

Fig. Fig. 3 Pull the motor out of its casing

  1. Installation is the reverse of removal.
  2.  



Click image to see an enlarged view

Fig. Fig. 4 Be careful when removing the blower motor not to damage the blower fan; always pull the motor straight outward from the casing

 
label.common.footer.alt.autozoneLogo