Dodge Omni/Horizon/Rampage 1978-1989 Repair Guide

Headlight Switch

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the left bezel.
  4.  



Click image to see an enlarged view

Fig. Fig. 1 Loosen and remove the headlamp switch mounting screws

  1. Remove the headlamp switch mounting screws.
  2.  
  3. Remove the switch from the panel and disconnect the wiring harness connector.
  4.  



Click image to see an enlarged view

Fig. Fig. 2 Disconnect the harness as you remove the switch from the dash

  1. Separate the switch and bracket by removing the bracket retainer.
  2.  
  3. Install in the reverse of removal.
  4.  

 
label.common.footer.alt.autozoneLogo