Dodge Omni/Horizon/Rampage 1978-1989 Repair Guide

Door Panels

Print

REMOVAL & INSTALLATION



  1. Remove the door lock knob.
  2.  



Click image to see an enlarged view

Fig. Fig. 1 Unscrew the door lock knob

  1. Remove the inside door handle and bezel trim.
  2.  
  3. Remove the arm rest and window handle crank.
  4.  



Click image to see an enlarged view

Fig. Fig. 2 Remove the screws securing the arm rest

  1. If equipped with a remote door mirror, remove the retaining trim nut.
  2.  



Click image to see an enlarged view

Fig. Fig. 3 If equipped with a remote control mirror, remove the retaining nut

  1. Use a wide prying device and unclip the panel retainers from the door. Remove the panel, and plastic shield. If necessary, remove the screws securing the upper panel, then remove the panel.
  2.  



Click image to see an enlarged view

Fig. Fig. 4 Special tools are available for removing the door panel



Click image to see an enlarged view

Fig. Fig. 5 If necessary, remove the screws securing the upper panel, then remove the panel

  1. After the panel is removed there is a plastic shield covering all of the interior mechanisms. Remove this only if you need to access any inner parts.
  2.  
  3. Install the weather shield and door panel in the reverse order of removal.
  4.  

 
label.common.footer.alt.autozoneLogo