Dodge Omni/Horizon/Rampage 1978-1989 Repair Guide

Front Door Glass and Regulator

Print

REMOVAL & INSTALLATION



  1. To remove the window glass:
  2.  
    1. Remove the door panel and weathershield.
    2.  
    3. Remove the glass stops and stabilizers.
    4.  
    5. Lower the window until the lift channel fasteners are visible. Remove the fasteners and disengage the glass from the lift channel. Remove the glass through the belt (upper) opening.
    6.  




Click image to see an enlarged view

Fig. Fig. 1 A common front door glass and regulator used on the models covered by this guide

  1. To remove the window regulator:
  2.  
    1. Remove the door panel and weathershield.
    2.  
    3. Secure the window in full up position.
    4.  
    5. Carefully drive out the center pin of the mounting rivets with a punch, then drill out the rivets with a suitable drill.
    6.  
    7. Disengage the regulator arm from the lift plate and remove the regulator through the access opening.
    8.  

  3. Install the regulator in the reverse order. Secure with suitable size bolts, lockwashers and nuts.
  4.  
  5. Install the window glass.
  6.  

 
label.common.footer.alt.autozoneLogo