Dodge Omni/Horizon/Rampage 1978-1989 Repair Guide

Rear Door Glass and Regulator

Print

REMOVAL & INSTALLATION



  1. To remove the glass:
  2.  
    1. Remove the door panel and weathershield.
    2.  
    3. Align the glass fasteners with the access hole and remove the fasteners. Lower the window glass after removing the lift fasteners.
    4.  
    5. Remove the lower division bar bracket screws and remove the bar bracket.
    6.  
    7. Disengage the division bar from the window glass and from the stationary glass and remove the bar through the main access hole.
    8.  
    9. Remove the stationary glass by applying a forward force to disengage the window seal from the door frame. Remove the door glass through the belt (upper) opening.
    10.  

  3. To remove the regulator:
  4.  
    1. Remove the door panel and weathershield.
    2.  
    3. Secure the window in full up position.
    4.  
    5. Carefully drive out the center pin of the mounting rivets with a punch, then drill out the rivets with a suitable drill.
    6.  
    7. Disengage the regulator arm from the lift plate and remove the regulator through the access opening.
    8.  

  5. Install the regulator in the reverse order. Secure with suitable size bolts, lockwashers and nuts.
  6.  
  7. Install the door glass.
  8.  



Click image to see an enlarged view

Fig. Fig. 1 Rear window regulator

 
label.common.footer.alt.autozoneLogo