Dodge Omni/Horizon/Rampage 1978-1989 Repair Guide

Jacking

Print

Floor jacks can be used to raise the car at the locations shown. Four door models only can be jacked at the extreme rear provided a 2x4x25 in. (minimum dimensions) wood spacer is positioned against the ledge of the rear bumper.



Click image to see an enlarged view

Fig. Fig. 1 A hydraulic floor jack and a set of jackstands are essential for lifting and supporting the vehicle



Click image to see an enlarged view

Fig. Fig. 2 Four door models may be raised from the rear bumper



Click image to see an enlarged view

Fig. Fig. 3 Jacking and hoisting locations

Jack receptacles are located at the front and rear of the body sill for use with jack supplied with a car. Do not use these lift points as bearing points for a floor jack.

 
label.common.footer.alt.autozoneLogo