Dodge Omni/Horizon/Rampage 1978-1989 Repair Guide

Relieving Fuel System Pressure

Print

  1. Loosen the fuel cap to release tank pressure.
  2.  
  3. Disconnect the injector wiring harness from the engine harness.
  4.  
  5. Connect a jumper wire to the ground terminal number 1 of the injector harness to the engine ground.
  6.  
  7. Connect a jumper wire to the positive terminal of number 2 of the injector harness. Touch the battery positive post for no longer then 5 seconds. This releases system pressure.
  8.  
  9. Remove the jumper wires.
  10.  



Click image to see an enlarged view

Fig. Fig. 1 no caption

 
label.common.footer.alt.autozoneLogo