Dodge Omni/Horizon/Rampage 1978-1989 Repair Guide

Body Code Plate

Print

The body code plate contains important information about your particular car which is usually needed for any correspondence with the factory. The plate is located on the left front fender side shield, on the left side of the upper radiator support or on the wheel housing.

The information on the plate is coded in 6 rows of digits and is read from left to right. The information can be interpreted using the information shown in the illustration.



Click image to see an enlarged view

Fig. Fig. 1 Engine identification location on the 1.7L



Click image to see an enlarged view

Fig. Fig. 2 Engine identification location on the 2.2L



Click image to see an enlarged view

Fig. Fig. 3 The manual transaxle serial number is stamped on a pad at the top



Click image to see an enlarged view

Fig. Fig. 4 The automatic transaxle serial number is stamped on a pad on the bottom side of the transaxle



Click image to see an enlarged view

Fig. Fig. 5 The body plate may be found on the left front fender side shield, on the left side of the upper radiator support or on the wheel housing



Click image to see an enlarged view

Fig. Fig. 6 The body code plate can be interpreted using this information

 
label.common.footer.alt.autozoneLogo