Dodge Omni/Horizon/Rampage 1978-1989 Repair Guide

Power Steering Pump

Print

REMOVAL & INSTALLATION



  1. Disconnect the power steering hoses from the pump.
  2.  
  3. Remove the adjusting bolt and slip off the belt.
  4.  
  5. Support the pump, remove the mounting bolts and lift out the pump.
  6.  
  7. Installation is the reverse of removal. Tighten the hoses to 25 ft. lbs. (34 Nm), the belt adjusting bolt to 30 ft. lbs. (41 Nm), and the lower stud nut to 40 ft. lbs. (54 Nm). Adjust the belt to specifications.
  8.  

 
label.common.footer.alt.autozoneLogo