REMOVAL & INSTALLATION
Remove the horn button and horn switch.
Fig. Fig. 1 Remove the horn button from the steering wheel
Fig. Fig. 2 Using a flat-bladed tool, remove the screws on the horn switch
Fig. Fig. 3 Next remove the horn switch from the wheel
Remove the steering wheel nut.
Fig. Fig. 4 Unscrew the wheel nut
Mark the location of the wheel and shaft for installation.
Fig. Fig. 5 Mark the location of the wheel and shaft for installation
Using a steering wheel puller, remove the steering wheel.
Fig. Fig. 6 Install a steering wheel puller on the shaft
Fig. Fig. 7 Pull the wheel off of the steering shaft
Align the master serration in the wheel hub with the missing tooth on the shaft. Tighten the shaft nut to 60 ft. lbs. (81 Nm).
Do not tighten the nut against the steering column lock or damage will occur.
Install the horn switch and button.