Dodge Omni/Horizon/Rampage 1978-1989 Repair Guide

Rear Wiper Blade and Arm

Print

REMOVAL & INSTALLATION



  1. Turn the wipers on and position the blade at a convenient place on the glass by turning the ignition OFF .
  2.  
  3. Lift the wiper arm off the glass.
  4.  
  5. Depress the release lever on the center bridge and remove the center bridge.
  6.  
  7. Depress the release button on the end bridge to release it from the center bridge.
  8.  
  9. Remove the wiper blade from the end bridge.
  10.  
  11. To remove the arm, pull out the latch knob and remove the arm from the pivot.
  12.  
  13. Installation is the reverse of removal. Be sure the element is engaged in all 4 bridge claws.
  14.  



Click image to see an enlarged view

Fig. Fig. 1 Remove the wiper blade from the end bridge



Click image to see an enlarged view

Fig. Fig. 2 Remove the arm from the pivot

 
label.common.footer.alt.autozoneLogo