Dodge Omni/Horizon/Rampage 1978-1989 Repair Guide

Rear Wiper Motor

Print

REMOVAL & INSTALLATION



  1. Open the liftgate.
  2.  
  3. Remove the wiper motor plastic cover.
  4.  
  5. Take off the blade and arm assembly.
  6.  
  7. Remove the chrome nut from the pivot shaft and the chrome ring from the pivot shaft.
  8.  
  9. From inside the tailgate, remove the motor mounting screws.
  10.  
  11. Disconnect the main liftgate wiring harness from the motor pigtail wire.
  12.  
  13. Remove the motor.
  14.  
  15. Installation is the reverse of removal.
  16.  



Click image to see an enlarged view

Fig. Fig. 1 Remove the wiper motor plastic cover



Click image to see an enlarged view

Fig. Fig. 2 Using a wrench, loosen the nut on the wiper shaft



Click image to see an enlarged view

Fig. Fig. 3 Remove the chrome nut ...



Click image to see an enlarged view

Fig. Fig. 4 ... and the chrome ring



Click image to see an enlarged view

Fig. Fig. 5 Pull the shaft cover off



Click image to see an enlarged view

Fig. Fig. 6 From inside the tailgate, remove the motor mounting screws



Click image to see an enlarged view

Fig. Fig. 7 Disconnect the wiring to the motor



Click image to see an enlarged view

Fig. Fig. 8 Windshield Wiper Diagnosis

 
label.common.footer.alt.autozoneLogo