Durango, 2001-2005

Coil Springs

Print

Removal & Installation



  1. Before servicing the vehicle, please familiarize yourself with safety procedures.
  2.  
  3. Support the lower control arm on a floor jack.
  4.  
  5. Remove or disconnect the following:

    Front wheel
     
    Shock absorber
     
    Stabilizer bar link
     
    Lower ball joint.
     

  6.  
  7. Lower the jack and remove the coil spring.
  8.  

To install:

  1. Install the coil spring and raise the control arm into position.
  2.  
  3. Install or connect the following:

    Lower ball joint. Tighten the nut to 135 ft. lbs. (183 Nm).
     
    Stabilizer bar link
     
    Shock absorber
     
    Front wheel

    Click image to see an enlarged view

    Fig. Coil spring type front suspension components-4WD models

    Coil spring type front suspension components-4WD models

    Click image to see an enlarged view

    Fig. Coil spring type front suspension components-2WD models

    Coil spring type front suspension components-2WD models
     

  4.  

 
label.common.footer.alt.autozoneLogo