E-Series Vans (1997-2005)
Removal & Installation
Before servicing the vehicle, refer to the Precautions Section.
Remove the radiator.
Disconnect the electrical connector. Release the wiring from the stator.
Use a hole in the fan hub to prevent the fan from turning.
Using the special tool, loosen the fan clutch by turning the wrench counterclockwise. Remove the cooling fan and clutch.
Fig. Using the special tool, loosen the fan clutch by turning the wrench counterclockwise-6.0L engine
Remove the bolts and cooling fan stator assembly.
Fig. Remove the bolts and cooling fan stator assembly
To install, reverse the removal procedure. Torque the stator bolts to 40 Nm (30 ft. lbs.) and the fun clutch to 133 Nm (98 ft. lbs.).