Removal & Installation
- Disconnect the negative battery cable.
- Carefully pry the dome lamp lens from the lamp assembly.
- Remove the three retaining screws for the map/dome lamp assembly and remove it from the headliner.
- Remove the bulb(s) from the terminals by gently pulling the bulb upward and out of the lamp assembly.To install:
- Slide the bulbs into place and gently press the bulb into the terminals on the lamp.
- Place the lamp assembly into place and tighten the retaining screws.
- Snap the lens into the lamp assembly.
- Connect the negative battery cable.
- Verify the operation of the lamp.